The Neck Removal Jig has just one purpose in life. That is to remove an acoustic guitar neck after loosening the dovetail joint glue. If you have ever tried to do this by hand, you understand that sometimes 2 hands is not enough. This jig will give you the convenience to do this job without worrying about slipping clamps ore block. These plans are FREE in PDF format and Plans are available in our Plan Shop.

The bridge ramp sanding jig has just one purpose in life. That is to sand the gentle curved ramps on the belly bridge, evenly and consistently. If you have ever tried to do these by hand, you will really appreciate this jig. To get the ramps on both sides of the bridge to look symetrical is not only a challenge, you will probably go through several bridge blanks before you get it right. This article will bring you through the step by step process of building the Ramp Sanding Jig for your shop. Plans are available in our Plan Shop.

Wood cam clamps have been the clamp of choice of luthiers for decades. The have many qualities that draw us guitar makers to them, such as, long reach or deep throat, easily adjusted with a sliding jaw, quick clamping ability, minimal damage during clamping due to the wood makup of the clamp. Now you can make your very own clamps by following our detailed PDF plans. We give you a set of electronically downloadable plans for 6″, 8″ and 10″ clamps, plus full construction details and materials.